Indicators – Datalogic Scanning DS6400 User Manual
Page 21
INTRODUCTION
1
These models provide higher scanning speed (1200 scans/sec) compared to standard
models and the reading performance is not adversely effected by the oscillating mirror.
The following example represents the selection of an angle of +10° for the bottom line and an
angle of +20° for the top line (see figure below).
+17.5°
+37.5°
+27.5°
ils about oscillating mirror mounting.
1.4 INDICATORS
T
dec
se
menus. The three keys present on the side of the display allow configuration menu
avigation (Figure C, 1).
he three LED indicators have the following functions:
R ON
(red)
Indicates the reader is turned on (Figure C, 4)
PHASE ON
(yellow) Indicates the presence sensor is turned on (Figure C, 3).
TX DATA
(green) Indicates the main serial interface is operating correctly during
data transmission (Figure C, 2).
Figure 5 - Oscillating Mode
he DS6400
oder ba provides an LCD display for system messages and configuration
n
T
POWE
5