Datalogic Scanning DS6400 - Manual (Page 57)

INSTALLATION
2
2.7.4 Multiplexer
The Multiplexer connection is used to integrate a DS6400 slave reader in a Multidrop
network consisting of different scanners not provided with a Lonworks interface.
Each scanner is connected to a Multiplexer (MX4000) with the RS485
half-duplex main interface.
EN T
<
<
EN T
<
<
1 RS485 HD Main Interface
* P.S. (Presence Sensor) connected to External Trigger/PS input.
Figure 56 – Multiplexer for DS6400 Master/Slave Models
The auxiliary serial interface of the slave scanners can be used to visualize collected data or
to configure it using the Genius™ utility.
When On-Line operating mode is used, the scanner is activated by an External Trigger when
the object enters its reading zone.
Local Host
P.S.* P.S.*
PWR-120
OX 10 OX 10 OX 10
DS6400 DS4600
P.S.*
MX4000
C-B 0 C-B 0 C-B 0
A DS4600A
#0 #1 #31 1
CAB-600X
41