Datalogic Scanning DS6400 - Manual (Page 73)

SOFTWARE CONFIGURATION
3
Then, proceed with the network setup by using one of the icons availab 3. le on the Tool
Bar according to the procedure to follow:
= Net-Autoset procedure
= Network Wizard procedure
= Express Network Setup procedure
econfiguration is
q
Net-Autoset
This procedure is to be used when all scanner addresses and labels are unknown (typically
when configuring the network for the first time or whenever a network r
re
uired).
By clicking the icon or selecting the "Net_Autoset" option from the right-click menu, the
-Autoset procedure is started allowing automatic assignment of random addresses to all
e or Stand Alone scanners connected w
t
slav ithin the network.
nc t is possible to:
• define customized addresses and labels through the Network Wizard
Ne
O e the procedure has been completed, i
;
• display the scanner default labels through the Express Network Setup.
Express Network Setup
Before performing this procedure, a Lonworks address must be assigned to each slave
scanner. The most practical method is through the
Net-Autoset procedure. See par. 3.2.3 for
alternative address assignment methods.
Once all addresses have been assigned, the Express Network Setup is to be used when all
scanner addresses and labels do not need to be modified.
By clicking on the icon or by choosing the related option from the right-click menu, the
procedure is started which automatically performs the following operations:
- opening the wizard;
- polling the network to discover connected scanners;
- transferring all scanners found to the "Requested Devices" area of the wizard where
your network customization is defined;
- saving the new network configuration;
Once the procedure has been completed, a dialog box will appear asking whether to send
the configuration to the Master. Choose the “Yes” option to start this procedure.
57