Playback in zone2/zone3 (separate room), Audio output, Qzone playback by speaker output – Marantz SR7007 User Manual
Page 107: N connecting and setting the speakers
104
Playback in ZONE2/ZONE3 (Separate room)
• You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE
(room where the unit is located).
• You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can
also play back separate sources in the MAIN ZONE, ZONE2 and ZONE3.
• When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the
device connected to the HDMI 1 - 6 IN connector in ZONE2 (HDMI ZONE2 function).
The source selected for ZONE2 is also output from the recording output connectors (MEDIA PLAYER).
NOTE
The following restrictions apply to the HDMI ZONE2 function.
• If you select a same input source for MAIN ZONE and ZONE2, audio playback may be restricted or video
may be interrupted.
• Video may not be output depending on the resolution of the TV used for MAIN ZONE and ZONE2. In this
case, use your player to set the resolution of the TV.
• The HDMI audio signals for the input source selected in ZONE2 are output from the ZONE2 speakers.
• When HDMI ZONE2 function is used, you cannot set the following.
• Picture Adjust
• Video Conversion
• Aspect Ratio
• Auto Lip Sync
• i/p Scaler
• Setup menu display
• Video Mode
• Progressive Mode
Audio output
It is possible to play 2-channel audio in rooms other than the MAIN ZONE where multi-channel playback is
done. Choose one of the methods.
q
Zone playback by speaker output
w
Zone playback by audio output (PRE OUT)
Use an external amplifier.
q
Zone playback by speaker output
• Set the “Assign Mode” (
) setting to “ZONE2” or “ZONE3”, and outputs ZONE2 or ZONE3
audio from SURROUND BACK speaker terminals (The default setting is “ZONE2”).
• If you set the “Assign Mode” (
) setting to “ZONE2” or “ZONE3”, the main zone home
theater system can play back up to 5.1 channels. Even if you play back audio recorded in 6.1 or 7.1
channels, this unit automatically downmixes the audio to 5.1 channels.
n Connecting and setting the speakers
)
and audio signals output
Connecting the speakers
ZONE2
ZONE2
Output signal :
Stereo (L / R)
ZONE2
w
q w
q
(L)
(R)
ZONE3
ZONE3
Output signal :
Stereo (L / R)
ZONE3
w
q w
q
(L)
(R)
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
v See overleaf
DVD