Marantz SR7007 - Manual (Page 110)

107
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Surround Parameter Adjusts surround sound parameters. 113
Tone Adjusts the tonal quality of the sound. 114
Dialogue Level Sets the output level to clarify the dialogue
output from the center channel. 114
Subwoofer Level Sets the subwoofer on/off and its output level. 115
M-DAX Expands the low and high frequency components
of compressed audio to enable richer audio
playback. 115
Audio Delay Compensates for incorrect timing between video
and audio. 116
Volume Set the MAIN ZONE (room where the unit is
located) volume setting. 116
Audyssey Makes Audyssey MultEQ® XT, Audyssey
Dynamic EQ® and Audyssey Dynamic Volume®
settings. 116
Graphic EQ Uses the graphic equalizer to adjust the tone of
each speaker. 118
Video
Picture Adjust Adjusts the video quality. 120
HDMI Setup Makes settings for HDMI video/audio output. 120
Output Settings Makes screen-related settings. 122
Component Video Out Sets whether to use the component video output
connector for MAIN ZONE or ZONE2. 123
Volume Display Sets where to display the master volume level. 123
Info Display Displays status of operation temporarily when
the sound mode is changed, or input source is
switched. You can set whether or not to show
each of these status displays. 123
Audio Display Sets how long each menu is displayed when the
input source is “NETWORK”, “iPod/USB”, or
“HD Radio”. 124
TV Format Set the video signal format to be output for the
TV you are using. 124
Setting items Detailed items Description Page
Inputs
Input Assign Changes input connector assignment. 126
Source Rename Changes the display name for this source. 127
Hide Sources Remove from the display input sources that are
not used. 128
Source Level Adjusts the playback level of the audio input. 128
Input Select Sets the audio input mode and decode mode. 128
Video Source Video of another input source is played back
combined with the playing audio. 129
Speakers
Audyssey® Setup The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically. 29 , 91
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey®
Setup. 131
Network
Information Display network information. 136
IP Control Set the network function on/off during standby. 136
Friendly Name The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences. 136
Settings Make settings for wired LAN. 137
Maintenance Mode Use when receiving maintenance from a marantz
service engineer or custom installer. 138
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
v See overleaf
DVD