Playback, Sleep timer function, Sleep timer function”) – Marantz SR7007 User Manual
Page 109
106
Playback
1
Press
ZONE SELECT
to switch
“ZONE2” or “ZONE3”.
Input source
select buttons
2
Press
ON/STANDBY
X
to turn
on the ZONE2 or ZONE3 power.
• Also press input source select button when
in standby mode, the power turns on.
• When
ON/STANDBY
X
is pressed, ZONE2
or ZONE3 turns off.
• Power in ZONE2 or ZONE3 can be turned
on or off by pressing
ZONE2 ON/OFF
or
ZONE3 ON/OFF
on the main unit.
3
Press the input source select
button to select the input source
to be played.
The audio signal of the selected source
is output to ZONE2 or ZONE3.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. In Step 1, press
ZONE SELECT
to select “MAIN” and then press
ON/STANDBY
X
.
Adjusting the volume
Use
VOLUME
df
to adjust the volume.
GAdjustable rangeH 0 – 40 – 98
(When the “Scale” (
) setting is “0 – 98”)
GAdjustable rangeH – – – –79dB – –40dB – 18dB
(When the “Scale” (
) setting is “–79.5dB – 18.0dB”)
• At time of purchase, “Volume Limit” (
) is set to “70
(–10dB)”.
Turn
VOLUME
after pressing
ZONE2 ON/OFF
or
ZONE3 ON/OFF
on the
main unit to adjust the sound volume.
Turning off the sound temporarily
Press
MUTE
:
.
The sound is reduced to the level set at “Mute Level” (
)
in the menu.
• To cancel, either adjust the volume or press
MUTE
:
again.
• The setting can also be cancelled by adjusting the volume or turning
off the ZONE2 or ZONE3 power.
You can adjust the tone and volume for ZONE2 or ZONE3 in “ZONE2
Setup” or “ZONE3 Setup” (
Sleep timer function
• This is convenient for viewing and listening while going to sleep in
ZONE2 or ZONE3.
• The sleep timer function can be set by zone.
1
Press
ZONE SELECT
to switch
“ZONE2” or “ZONE3”.
2
Press
SLEEP
and display the time
you want to set.
• The time switches as shown below each time
SLEEP
is pressed.
Off
10 min
20
30
40
50
60
80
70
90
100
110
120
To confirm the countdown time before putting the
unit to sleep
Press
SLEEP
.
“Z2 Sleep :
zmin” or “Z3 Sleep : zmin” appears on the display.
z Countdown time
To cancel the sleep timer
Press
SLEEP
to set “Off”.
The sleep timer is also cancelled when this unit is set to the standby
mode or the ZONE2 or ZONE3 power is turned off.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn off the power of those connected
devices, set up sleep timers on the connected devices themselves.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD