Marantz SR7007 - Manual (Page 99)

96
Setup ( vpage 29 )
Playback (Basic operation) ( vpage 36 )
Selecting a listening mode (Sound Mode)
( vpage 75 )
Connections (Advanced connection) ( vpage 94 )
n HDMI control function ( vpage 96 )
n Sleep timer function ( vpage 98 )
n Web control function ( vpage 99 )
n Dual backup memory function ( vpage 101 )
n Panel lock function ( vpage 101 )
n Remote lock function ( vpage 102 )
n Switches light illumination on/off ( vpage 103 )
n Various memory functions ( vpage 103 )
Playback (Advanced operation)
HDMI control function
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
n Operations possible by HDMI control
• This unit power off can be linked to the TV power off step.
• You can switch audio output devices with a TV operation.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the amp power on.
• You can adjust this unit volume in the TV volume adjustment
operation.
• You can switch this unit input sources through linkage to TV
input switching.
• When playing the player, this unit input source switches to the
source for that player.
• If you switch the input source of the unit to “TV AUDIO”, you
can play TV audio with this unit ( vpage 9 “About ARC
(Audio Return Channel) function”).
• When “HDMI Control” ( vpage 121 ) in the menu is set to
“On”, signals input to the HDMI input connector are output to
the television or other device connected to the HDMI output
connector, even if the power of this unit is in standby (pass-
through function).
• To use this unit to play the audio of a TV that does not support
the ARC function, connect the TV with an optical-digital or analog
connection (
vpage 9 ).
• To use the pass-through function, connect an HDMI connection
device that is compatible with HDMI control.
n Setting procedure
1 Set the HDMI output connector corresponding with
the HDMI control function.
Set “HDMI Control” ( vpage 121 ) to “On”.
2 Turn the power on for all the devices connected by
HDMI cable.
3 Set the HDMI control function for all devices
connected by HDMI cable.
• Please consult the operating instructions for the connected devices
to check the settings.
• Carry out steps 2 and 3 should any of the devices be unplugged.
4 Switch the television input to the HDMI input
connected to this unit.
5 Switch this unit input to the HDMI input source and
check if the picture from the player is ok.
6 When you turn the TV’s power to standby, check
that the power of this unit also goes to standby.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
v See overleaf
DVD