To “on, When “hdmi control, Is set to “on” : orange – Marantz SR7007 User Manual
Page 124: Set “hdmi control, Set to “all” or “video, Is “control monitor, Setting is changed
121
Video
Setting items
Setting details
Video Output
Make settings for HDMI
monitor output.
Auto (Dual) : The presence of a TV connected to the HDMI MONITOR
1 or HDMI MONITOR 2 connector is detected automatically, and that TV
connection is used.
Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
2 connector.
Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
1 connector.
• If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
) is set to “Auto”, the signals
are output with a resolution compatible with both TV.
• With “Resolution” (
) not set to “Auto”, check whether
the TV you are using is compatible with the resolution under “Video” –
“Monitor” (
• This can also be set by pressing
HDMI OUT
on the main unit.
Each time
HDMI OUT
is pressed, the setting is changed as shown below.
Auto (Dual)
Monitor 1
Monitor 2
NOTE
Depending on the monitor you have connected, the display may not
be correct when you set to “Auto (Dual)”. In such a case, set to either
“Monitor 1” or “Monitor 2”.
Setting items
Setting details
HDMI Control
You can link operations with
devices connected to HDMI
and compatible with HDMI
Control.
On : Use HDMI control function.
Off : Do not use HDMI control function.
• When a device that is not compatible with the HDMI control function is
connected, set “HDMI Control” to “Off”.
• Please consult the operating instructions for each connected device to
check the settings.
• Refer to “HDMI control function” (
about the HDMI control function.
NOTE
• When “HDMI Control” is set to “On”, it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the “HDMI Control” settings have been changed, always reset the
power to connected devices after the change.
Standby Source
Sets the HDMI input source
to put into standby when
the power is on.
Last : Enters standby with the previously used input source.
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER /
CD : Enters standby with each of the input sources assigned to each input
connector.
“Standby Source” can be set when “HDMI Control” is set to “On”.
Control Monitor
Set the HDMI MONITOR
terminal to output the HDMI
control signal.
Monitor 1 : Output from the HDMI MONITOR 1 connector.
Monitor 2 : Output from the HDMI MONITOR 2 connector.
• “Control Monitor” can be set when “HDMI Control” is set to “On”.
• ARC function works only with the terminal selected by “Control
Monitor”.
Power Off Control
Links the power standby of
this unit to external devices.
All : If power to a connected TV is turned off independently of the input
source, power to this unit is automatically set to standby.
Video : If power to a connected TV is turned off when the input source is
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / CD,
power to this unit is automatically set to standby.
Off : This unit does not link with power to a TV.
“Power Off Control” can be set when “HDMI Control” is set to “On”.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD