Marantz SR7007 - Manual (Page 156)

153
Setting the back light
Press the Light button on the side of the remote control, and the
buttons on the remote control light for 2 seconds. If the Light button
is pressed while the buttons are lit, the buttons remain lit for another
2 seconds.
• Backlight is set on in the factory settings.
Disabling the backlight
Press and hold both SET and Light
button until indicator flashes
twice.
Light button
Turning the backlight on
Press and hold both SET and Light
button until indicator flashes
twice.
Light button
Specifying the zone used with the
main remote control unit
When the ZONE SELECT button is pressed, only the set zone can be
operated with the remote control unit.
• The factory setting is “M23”.
1
Press and hold ZONE SELECT
and SET for at least 3 seconds.
2
Use ui to set the zone to be used
and press ENTER .
“SET” flashes four times on the remote
control unit and the normal operation
mode is restored.
Remote control
unit display
Zone to be used
M MAIN ZONE only
M2
MAIN ZONE /
ZONE2
M23
MAIN ZONE /
ZONE2 /
ZONE3
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD