Set up “channel select””) – Marantz SR7007 User Manual
Page 95
92
Set up speakers
7
Set up “Channel Select”
Use
ui
to select “Channel Select”, and then press
ENTER
.
Channel Select
Subwoofer
Measure
Surround Back
Measure (2 spkrs)
Audyssey Setup
Amp Assign
Channel Select
Start
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
8
Use
ui
to select a channel, and then press
ENTER
.
Subwoofer Select for no subwoofers to be used. In this case, go
to step 9.
Surround
Back
Select the number of surround back speakers to be
used. In this case, go to step 10.
• “Surround Back” can be set when “Assign Mode” is
set to “Main Only”.
Front
Height
Select for no front height speakers to be used. In this
case, go to step 11.
• “Front Height” can be set when “Assign Mode” is
set to “Main Only”.
Front Wide Select for no front wide speakers to be used. In this
case, go to step 12.
• “Front Wide” can be set when “Assign Mode” is set
to “Main Only”.
9
Use
o
p
to set whether or not a subwoofer channel is
measured, and then press
ENTER
.
Measure Set for measuring a subwoofer.
Skip
Set for no measuring of a subwoofer.
10
Use
o
p
to set whether or not a surround back
channel is measured, and then press
ENTER
.
Measure
(2spkrs) Set for measuring two surround back speakers.
Measure
(1spkr)
Set for measuring a surround back speaker.
Skip
Set for no measuring of a surround back speaker.
5
Use
o
p
to select the
configuration of the connected
speakers, and then press
ENTER
.
Main Only
Setting for 7.1-channel playback using surround
back, front height, or front wide speakers.
ZONE2
Setting to assign the unit’s built-in power amplifier
for ZONE2 and output the audio in stereo.
ZONE3
Setting to assign the unit’s built-in power amplifier
for ZONE3 and output the audio in stereo.
Bi-AMP
Setting to use the front speakers via the bi-amp
connection.
Front B
Setting to use the second set of front speakers for
playback.
6
Press
o
or
BACK
to exit the “Amp Assign” setting.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
v See overleaf
DVD