Marantz SR7007 - Manual (Page 89)

86
FL FR
C
SL SR
SW
SB
Connecting 6.1-channel speakers using one surround back
speaker
If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal.
For speaker settings in this case, see “When 6.1ch speakers are installed” (
vpage 83 ).
To perform 6.1-channel playback using the surround back speaker, set “Assign Mode” to “Main Only” in
steps 3 to 5 for “Set up “Amp Assign”” (
vpage 91 ).
Also use the “Speaker Config.” setting ( vpage 132 ) to set “Surr. Back” to “1spkr”.
Cables used for connections
Audio cable (sold separately)
Speaker
cable
Subwoofer
cable
NOTE
• For speaker cable connections, see page 84 .
• For speaker impedance , see page 84 .
Speaker connection
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD