Additional resources – Datalogic Scanning Pegaso User Manual
Page 106
SNMP Interface
D-2
Pegaso™ Industrial PDA with Windows
®
CE
The format of an MIB follows rules laid out in the appropriate standards, allowing the
manufacturers of network management tools such as HP OpenView and CastleRock
SNMPc to make use of the MIBs developed by manufacturers. So by following the pro-
cedures used by the management tool, the MIB can be processed by the tool allowing
the proper display of SNMP values retrieved from the agent.
For example, if the Datalogic MIB is loaded into OpenView, the administrator can then
view all of the values defined by Datalogic using the names assigned by Datalogic, as
well as a brief explanation of what each value represents. This will also allow the admin-
istrator to update most values, and provides range checking information for the tool to
take advantage of. The current Datalogic MIB can be found on the Datalogic Mobile
website at
ownloads area.
Additional Resources
Additional information on SNMP can be found at the following websites: