Datalogic Scanning Pegaso - Manual (Page 35)

Regional Settings
Product Reference Guide 2-21
Regional Settings
To change the Regional Settings defaults, select Start > Settings > Control Panel > Regional
Settings .
1. Select your locale from the spin box. See Figure 2-18 on page 2-21 .
2. Review the Appearance Samples in the bottom half of the screen. Click Customize
to change the appearance of Number , Currency, Time , and Date.
Figure 2-18. Region and Custom Settings
3. The options on the Language tab are disabled because the Pegaso will display only
in English.
4. The Input Panel will open to facilitate data input.
Figure 2-19. Language and Input Tabs
5. To exit Regional Settings , tap OK on the control bar, or press <Enter> on the keypad.