Datalogic Scanning Pegaso - Manual (Page 121)

Bar Code Parameters
Product Reference Guide F-13
Convert UPC-
E to UPC-A
Instructs the decoder to expand UPC-E labels
to their UPC-A equivalents. Any UPC-A
parameters will then apply to the result.
050C On / Off Off On Off
Read Verifi-
cation Sets the number of times a label must be read
before it is transmitted.
0522 01 - 04 01 02 01
User ID
Specifies the symbology identifier (if any) that
is sent by the decoder when parameter Send
Code ID (Index 0025) is set to 3. "ASCII" code
zero (null) is used to indicate that an identifier
is not to be sent for the symbology.
0523
Any single
ASCII
character
(00 = Off)
'E' 'E' 'E'
UPC/EAN Extensions
Enter 1 for On
and 0 for Off.
Enable 2-
Digit Exten-
sions Requires a 2 digit extension (supplemental
label) to be verified for a successful decode of
a label.
051C On / Off Off On On
Enable 5-
Digit Exten-
sions Requires a 5 digit extension (supplemental
label) to be verified for a successful decode of
a label.
051D On / Off Off On On
Require
Extensions
Instructs the decoder to require any enabled
UPC/EAN extensions (supplemental labels) to
be with a label in order for a scan to be suc-
cessful.
051F On / Off Off Off Off
Read Verifi-
cation
Sets the number of times an extension (sup-
plemental label) must be read before it is
included in the transmission of the base UPC/
EAN label.
0528 01 - 04 01 01 01
Code Parameter/ Description I.D. #
Acceptable
Input
Defaults
Min Max Factory