Datalogic Scanning Pegaso - Manual (Page 37)

Stylus Calibration
Product Reference Guide 2-23
Figure 2-20. Stylus Properties Control Panel
4. Tap Recalibrate to open
the Calibration screen
shown to the right
5. Carefully press and
briefly hold stylus on
the center of the target
as the target moves
around the screen or
press
<ESC> to cancel
the stylus calibration.
For more information about
the touch-sensitive display,
refer to “Using the Stylus”
and “Navigating the Display”
in the Quick Start Guide (QSG).