Datalogic Scanning Pegaso - Manual (Page 78)

Accessories
A-6 Pegaso™ Industrial PDA with Windows ® CE
Modem Module
An optional Modem Module allows you to use the Pegaso to dial a server in a remote
office.
Features:
• V.92/56K data rate backward compatible with
lower speeds
• V.44 and V.42 bits data compression
• V.42 error correction
• AT command compatible
• U. S. Caller ID reporting
• FastPOS (V.29) and V.22vis Fast Connect
• V.80 Synchronous Access
• Built-in speaker
• Easy to use
To connect:
1. Remove the Pegaso from the dock and detach power from the dock.
2. Plug the modem module into the dock, and then plug the phone cable into
modem.
3. Replace the Pegaso into the dock and restore power.
4. Select Start > Settings > Network and Dial-up Connections to open dial-up network-
ing.
5. Tap Make New Connection to create a new connection.
6. Type a name for the connection, and tap the radio button to select Direct Connec-
tion . Tap Next .
7. Select Hayes Compatible Modem on Com1 as the device.