Viewing or deleting paired devices, Viewing or deleting paired devices -5 – Datalogic Scanning Pegaso User Manual

Page 19

Advertising
background image

Bluetooth Manager

Product Reference Guide

2-5

Virtual Port

allows you to specify the incoming port, which is used to communicate seri-

ally with an incoming device just as if it were a physical COM port. This option is avail-
able only if you have selected a Printer or Serial service.

You can also select

Encrypt

or

Authenticate

from the Bluetooth control panel to apply or

modify those settings.

1. To require Authentication, tap the checkbox, then

tap

OK

.

2. The Authentication Request dialog will then

open, requesting that you enter a PIN. Use the
Input Panel to type in the PIN.

3. Tap

OK

to complete.

The dialog will also appear when an Authentication
request is received from another device.

Viewing or Deleting Paired Devices

Once you have set up a Pairing, you can view the settings by double-tapping its name
from the Connections tab. Tap the arrow to change the Virtual Port, or Delete to
remove the device pairing. Tap Sync to initiate a Sync (available only if the service is an
ActiveSync connection).

Figure 2-4. Bluetooth Pairing Info

The icons displayed in the taskbar at the bottom of your Pegaso’s screen will show you
the state of the Bluetooth connection, as shown in Table

2-1

.

Advertising