Datalogic Scanning Pegaso - Manual (Page 82)

Accessories
A-10 Pegaso™ Industrial PDA with Windows ® CE
Belt Clip
The Belt Clip comes with two separate pieces:
one that attaches to the Pegaso, and one that
attaches to your belt.
To install the Belt Clip on the unit, complete
the following steps:
1. Turn the Pegaso face-down and ensure
that power is off.
2. Orient the Belt Clip on the underside of
the Pegaso.
3. Align the “ears” on the inside of the Belt Clip with the corresponding holes on the
underside of the Pegaso and slide them into place.
4. Push the top of the Belt Clip against the Pegaso and turn the quarter-turn fastener
to secure it.
The Handstrap can be left on when installing the Belt Clip.
Ears