Datalogic Scanning Pegaso - Manual (Page 32)

Configuring the Pegaso
2-18 Pegaso™ Industrial PDA with Windows ® CE
Owner
To change the Owner default settings:
1. Select Start > Settings > Control Panel > Owner
Properties . The Input Panel opens to facilitate
entering data.
2. Enter data using the input panel or the keypad
on the PDA.
3. To exit the Owner Properties control panel, tap
OK on the control bar, or press <Enter> on the
keypad.
For more information on using the Network ID tab,
refer to "Setting up the Network ID" on page 4-8 .
Password
To change the Password default settings:
1. Select Start > Settings > Control Panel > Password
Properties .
2. Enter the desired password twice as indicated
in the two fields.
3. Select to enable password protection at power-
on and/or enabling password protection for
the screen-saver.
4. To exit the Password control panel, tap OK on
the control bar, or press <Enter> on the keypad.