Datalogic Scanning Pegaso - Manual (Page 112)

Programming Parameters
F-4 Pegaso™ Industrial PDA with Windows ® CE
Code 39
Enter 1 for On
and 0 for Off.
Enable Enables/disables the Code 39 symbology. 0100 On / Off Off On On
Enable
Aggressive
Decoding Enables more aggressive decoding algorithms
to be used in order to scan hard to read
labels.
0101 On / Off Off On Off
Enable
Checksum Requires the use of checksum characters to
verify a bar code.
0102 On / Off Off Off Off
Send Check-
sum Instructs the terminal to include the checksum
in the label transmission.
0103 On / Off Off Off Off
Full ASCII
Mode
Supports the entire ASCII character set by
replacing various encoded ASCII characters
with their corresponding "ASCII" equivalents.
0105 On / Off Off On On
Minimum
Label Length Set the minimum label length to be less than
or equal to maximum label length.
0120 01 - 50 01 01 01
Maximum
Label Length
This feature specifies the maximum allowable
length of a Code 39 label. The length includes
check and data characters. Maximum Label
Length should be greater than or equal to Min-
imum Label Length.
0121 01 - 50 01 50 20
Read Verifi-
cation Sets the number of times a label must be read
before it is transmitted.
0122 01 - 04 01 02 01
User ID
Specifies the symbology identifier (if any) that
is sent when parameter Send Code ID (Index
0025) is set to 3. "ASCII" code zero (null) is
used to indicate that an identifier is not to be
sent for the symbology.
0123
Any single
ASCII
character
(00 = Off)
'C' 'C' 'C'
Code 93
Enter 1 for On
and 0 for Off.
Enable Enables/disables the Code 93 symbology. 0400 On / Off Off On Off
Enable
Aggressive
Decoding Enables more aggressive decoding algorithms
to be used in order to scan hard to read
labels.
0401 On / Off Off On Off
Minimum
Label Length Set the minimum label length to be less than
or equal to maximum label length.
0420 01 - 50 01 01 02
Code Parameter/ Description I.D. #
Acceptable
Input
Defaults
Min Max Factory