Power configuration, Power configuration -20, Efer to "the battery – Datalogic Scanning Pegaso User Manual
Page 34: For mor
Configuring the Pegaso
2-20
Pegaso™ Industrial PDA with Windows
®
CE
Power Configuration
To adjust power management settings, select
Start > Settings > Control Panel > Power
. Use
this control panel to check the charge on the battery or to change the
Power
settings.
Battery Tab
The
Battery
tab provides power indicators for External power,
Main battery
, and
Backup
battery
as shown in Figure 2-17 on page
. To save your settings, tap
OK
on the com-
mand bar, or press
<Enter>
on the keypad.
Schemes Tab
The
Schemes
tab allows you to switch the power scheme and specify the Idle settings for
User (in 1-minute increments) or System (in 5-minute increments). You can also specify
Suspend settings in 5-minute increments). To save your settings, tap
OK
on the com-
mand bar, or press
<Enter>
on the keypad.
Device Status Tab
The
Device Status
tab displays the power usage of active devices.
Figure 2-17. Battery and Power Tabs