Datalogic Scanning Pegaso - Manual (Page 99)

Product Reference Guide C-1
Appendix C
Configuring the Web Server
Overview
The Web Server can perform several different actions, including generating a web page
containing statistics relating to performance of the mobile computer. The Web Server
can also be used for creating an interface for interaction with the Terminal to configure
system behavior.
This section contains the following topics on configuring the Web Server:
• "Enabling the Web Server" below.
• "Testing the Web Server" on page C-3 .
• "Launching the Network Administration Page" on page C-4 .
• "Web Server Registry Settings" on page C-4 .
• "Creating and Using an ISAPI Service" on page C-5 .
Enabling the Web Server
By default the Web Server is disabled. The following demonstrates how to enable the
Web Server:
1. On the Pegaso, either through a CE-based registry editor or using the Remote
Tools RemoteRegEdit included with eVC++ 4.0, modify the following registry
entry:
[HKEY_LOCAL_MACHINE\COMM\HTTPD]
"Enabled"=dword:1
2. In a Command Prompt window on the Terminal, type the following:
\> services list
This will display a list of loaded and services and their state.
3. If the service HTP0: is not listed, then type the following to load the HTTP Web
Server:
\> services load httpd
4. If the service is listed and not running, type the following to start the HTTP Web
Server:
\> services start HTP0: