NewTek TalkShow VS-100 - Manual (Page 13)

Page | 5
NewTek’s ‘Always on Air’ failsafe system provides multi-tier redundancy. Software
processes continually monitor and safeguard the live performance. Recoverable error
conditions are quickly and unobtrusively dealt with. The system can automatically
display a still image of the remote caller while maintaining audio transmission, should
unforeseen bandwidth constraints occur below specified values.
TalkShow also has a comprehensive integrated system restore feature. Operators can
quickly and easily restore to factory defaults, or create a restore image on an external
drive, then restore from it should a complete hard drive failure ever occur.

A studio-grade production source, TalkShow™ delivers HD-SDI video to the
switcher, with automatic aspect ratio handling.

Full 4:4:4:4 32-bit floating point internal processing of all video sources.

Proc Amp, White Balance, and Auto Color features ensure responsive,
professional quality live color correction. Adjust video output to compensate for
environmental variations automatically, manually, or both.

SDI-embedded or (balanced) analog audio input and output, with quality
enhancement
features including integrated graphic equalizer and
compressor/limiter to enhance quality, maintain consistent levels, and prevent
clipping or overdriving.

Record incoming call audio and video (and optional return audio on isolated
channels for post-production) to local or networked storage.

Supports NewTek’s unique AirSend™ technology that can transmit all required
a/v signals between TalkShow and a TriCaster™ live production system across a
network, without any other cabling or using up precious switcher input and
output connections.