Programming, Sa controller setpoint screens – Orion System SA Controller User Manual
Page 34
Advertising
Zone
Zone
Programming
SA Controller Operator Interface
34
Setpoint Screen #33 - Sensor Calibration for
COIL
SA Unit Spts ID 102
Sensor Calibration
COIL: XX.Xº 0.00º
If the Coil Temperature reading is too high, enter a negative calibration
offset to decrease the reading. If it is too low, enter a positive value to
increase the reading.
Description
Minimum
Default
Maximum
Sensor Calibration COIL
-30.0ºF
0.0ºF
+30.0ºF
SA Controller Setpoint Screens
Advertising