Orion System SA Controller - Manual (Page 65)

SA Controller Operator Interface
Index
65
S-T
Minimum Supply Fan VFD Speed For Heating.........28
Morning Warm Up Temp.........28
Preheat Ambient Temperature.........31
Push-Button Override Duration.........32
SAT Cooling Setpoints.........26
SAT Heating Setpoints.........27
Screen Index.........25
Sensor Calibration for COIL.........34
Sensor Calibration for EAT & EWT.........33
Sensor Calibration for SPC & SAT.........33
Stage Control Window.........28
Static Setpoint, Deadband & Control Rate.........30
Supply Fan Starting Delay Timer.........31
Trend Log Interval.........33
Unoccupied Setbacks.........26
Water Side Economizer Setpoints.........30
Setpoint Screens
Index.........25
Set Time & Date.........36
Setting
Date.........37
Day of Week.........37
Month.........37
Year.........37
Slide Adjust.........41
Slide Offset
VAV/Zone Status.........52
Smoke Detector.........15,16
Smoke Detector Input.........22
Software
Current Version.........10
Space Sensor Overrides Screen.........12
Space Temperature.........41
Confi guration.........18
HVAC Reset Source.........18
Space Temperature Return Air and Slide Adjust
SA Controller Status.........41
Space Temperature Sensor.........40
SPC.........33
Stage Control Window Setpoints.........28
Staging Up and Down Delay Periods.........23
Stand-Alone
Confi guration.........13
Connection.........7
Mode.........10,13
Start and Stop Times
2359.........35
ZERO.........35
Static Pressure
Output % SA Controller Status.........42
SA Controller.........42
Static Spt, Deadband & Control Rate Setpoints.........30
Status
Button.........40
Key.........9
Status Screens
Head Pressure Condenser Fan #1.........44,45
Suction Pressure.........29
Suction Pressure Transducer.........29,42
Supply Air
Confi guration.........18
Setpoint Reset.........16
Temperature.........52
Supply Air Control.........40
SUPPLY AIR CUTOFF!.........40
Supply Air Temperature Reset.........18
Supply Air Temperature & Setpoint.........40
Supply Fan
Cycle Screen.........18
Starting Delay Timer Setpoint.........31
System
Status.........56
Type.........55
System Manager
Connection Diagram.........5
Dimensions.........3
Initialization Screens.........10
Mode Selection Buttons.........9
Override Search.........12
Passcodes.........12
SA Controller Setpoints.........25
Setpoints Button.........18
T
Testing the System
Outputs Force.........38
Time
24-Hour Military Format.........35
Daylight Savings.........37
Time & Date.........36
Trend Log Interval.........33
Troubleshooting the System
Outputs Force.........38
Two Condenser Head Pressure Module.........44,45