Orion System SA Controller - Manual (Page 64)

Index
SA Controller Operator Interface 64
S
Screens, continued
Indoor Humidity Sensor Screen.........19
Initialization for Modular Service Tool.........13
Initialization Screen.........10
Internal Schedule Optimal Start Soak Multiplier
Setpoint.........33
Loop Search Screen.........11
Mechanical Heat/Cool Failure Time Period
Setpoints.........31
MiniLink PD Confi guration.........55
Minimum Supply Fan VFD Speed for Heating
Setpoint.........28
Mod Cool 1 Override.........39
Mod Cool 2 Override.........39
Mod Heating Override.........39
Modulating Cooling/Heating Screen.........20
Modulating Cooling Proportional Window
Screen.........21
Modulating Cooling Reverse Acting Screens.........21
Modulating Heating Output Signal Screen.........20
Modulating Heating Proportional Window
Screen.........20
Modulating Heating Reverse Acting Screen.........20
Morning Warm Up Temp Setpoint.........28
Multiple Digital Compressors.........21
Outputs Force Screen.........38
Overrides Screen.........12,14
Preheat/Low Ambient Temperature Setpoint.........31
Proof of Flow Input Screen.........20
Push-Button Override Duration Setpoint.........32
Relay Confi guration Screens.........24
Relay Overrides.........39
Reset Interval Rate.........18
Reversing Valve Active During Heat/Cool.........21
SA Confi guration Screens.........18
SA Controller Status Screens.........40
SAT Cooling Setpoints.........26
SAT Heating Setpoints.........27
Schedule Override.........36
Sensor Calibration for COIL.........34
Sensor Calibration for EAT & EWT.........33
Sensor Calibration for SPC & SAT.........33
Set Time & Date Screens.........36
Space Sensor Overrides Screen.........12
Stage Control Window Setpoints.........28
Static Setpoint, Deadband & Control Rate Set-
points.........30
Supply Fan Cycle Screen.........18
Supply Fan Starting Delay Timer Setpoint.........31
Trend Log Interval Setpoint.........33
Unit Selection Screens.........9
Unoccupied Cooling & Heating Setbacks
Setpoints.........26
Uses R410A.........23
VAV/Zone Box Confi guration.........46
VAV/Zone Confi guration.........46
VAV/Zone Controller Setpoints.........48
VAV/Zone Damper Force Modes.........54
VAV/Zone Damper Operation.........46
VAV/Zone Status.........52
Water Cooled Condenser.........21
Water Side Economizer Control Screen.........19
Water Side Economizer Setpoints.........30
Water Side Variable Flow.........19
Week Schedules.........35
WSE Bypass A Override.........39
WSE Bypass B Override.........39
Search
For Loops.........11
For Overrides.........12
Selection Buttons
Defi ned.........9
Sensor
EAT & EWT Setpoint.........33
Sensor Calibration
COIL.........34
Space Temperature.........51
SPC & SAT Setpoint.........33
Supply Air Temperature.........51
Sensor Calibration for EAT & EWT.........33
SERIES FAN BOX
VAV/Zone.........46
Setpoints
Adaptive Defrost Adjustment Setpoint.........33
Button.........9,18,25,46,54
Cool Reset Source.........26
Cutoff Temperature.........28
Defrost Temperature.........32
Dehumidifi cation Coil Temperature.........29
Dehumidifi cation Indoor RH & Entering Air
Dewpoint.........29
Delta Setpoint.........30
Entering Air Lockouts.........28
Head Pressure Cooling Setpoint.........29
Head Pressure Output Minimum Position
Setpoint.........30
Head Pressure Reheat Setpoint.........29
Heat Pump Auxiliary Heating Delay.........32
Heat Pump Defrost Setpoints.........32
Heat Reset Source.........27
HVAC Mode Select Deadband.........26
HVAC Mode Sensor Slide Offset.........32
HVAC Mode Setpoints.........26
HVAC Schedule.........31
Internal Schedule Optimal Start Soak Multiplier.........33
Mechanical Heat/Cool Failure Time Period.........31