Skutt KilnMaster Kilns Manufactured after March 1 2006 - Manual (Page 24)

24
n
ew
f
eatures
Among other changes, the New KilnMaster 700 Board has the ability to do self-diagnostics. It can now show the
voltage and amperage directly from the display, eliminating the need for expensive test equipment or having to
hire a technician. Look through the entire MENU selection to become familiar with the options available to you.
n
eW
M
enu
l
ayOut
With the exception of the new green 14-segment LED display, you will notice that the board and all of the function
keys look exactly the same. All of the changes have been made in the MENu key.
There are now four option headings under the MENu key. They are:
SET Settings ●
dIAG Diagnostics ●
CNFG Configurations ●
Other ●
M
enu
p
rOgraMMing
t
ips
To access the Menu Headings, press MENu.
You can toggle though the Menu Headings by continuing to press the MENu key. When you reach the one you
wish to access press ENTER This will take you to the first option in that submenu. As before, if you want to toggle
through the various options under the selected Heading, press MENu. When you reach the option you wish to
access, press ENTER.
When you select an option, you are asked to either:
Toggle the option ● ON/OFF
Input ● a value
Choose a value ●
To toggle options ON/OFF, press 1. When you get to the desired setting, press ENTER.
To Input a value such as a Delay time or an Alarm temperature, input the value and press ENTER.
To select a value, press the MENu key until your selection is displayed, and then press ENTER.
m
enu
f
eatuRes
- - - -