Super Systems 9205 Series - Manual (Page 24)

Series 9205 Operations Manual Rev A 23
• Probe Burnoff Setup
• PID Loop Setup
• Recipe Edit
• Load T/C Configuration
• Trend Chart Edit
• Communications Setup
• Slave Instrument Setup
• Zone Assignments
• Furnace Setup
• Default Wait Limits
• Alarm Setup
• Thermocouple Check
• Relay Assignments
• Analog Input Setup
• Analog Output Setup
• Alarm Polarity
• Redundant TC Setup
• Event Hold/Reset
• Security
• Curve Entry
• Alternate PID Setup
• Aux Analog Input Setup
• Calibration
• Configuration
• A/I Module Offset Correction
• Aux Setpoint Configuration
• T/C Extension Correction Curves
• Generic Instrument Setup
• DF1 Configuration
• Tuning Assistant
• PLC Data Matching
• Analog Input Correction Curves
• Instrument Calculation
The SSi code of the day can also be used to log in to the menu system. No user name will need to be
entered when entering this code. Currently, the menu list is identical to the administrator-level list. The
SSi code of the day is typically used for in-house configuration prior to shipment. The code can only be
provided by Super Systems at (513) 772-0060.
To select any of the menu options, highlight that item by clicking on it, and click on the Detail button.
The Return button will return the user to the default display screen.