Super Systems 9205 Series - Manual (Page 82)

Series 9205 Operations Manual Rev A 81
Last Min mV:
This value is a display of the minimum millivolts measured during the last burnoff or impedance test.
Last Impedance:
This value is a display of the measured resistance, in Kohms, after the last impedance test.
Last Max TC:
This value is a display of the maximum measured probe thermocouple input value during the last burnoff.
Slave Instruments
This page is a display of the current process
variables of each of the slave instruments
communicating with the 9205 controller. Note:
None of the values can be modified on this screen .
For setup of the auxiliary instruments, go to the
menu item Slave Instrument Setup
Auxiliary Analog Input
This menu option shows the process variables for the
three analog inputs of the 9205 controller. It also shows
the input types and any information from attached slave
analog input modules. Note: None of the values can be
modified on this screen .