Teac DR-40 - Manual (Page 103)

TASCAM DR-40
103
Restoring the factory settings
Use the
INITIALIZE
item to restore the various settings of
this unit to their factory settings.
1 Use the + or − button to select
INITIALIZE
, and press
the ENTER/MARK or / button to highlight
Exec
.
2 Press the ENTER/MARK button again to open a
confirmation pop-up window.
3 Press the ENTER/MARK button to initialize the unit.
Press (HOME) [8] to cancel initialization.
Using QUICK FORMAT
Using
QUICK FORMAT
erases all music files on the card and
automatically creates new MUSIC and UTILITY folders as well as
the “dr-1.sys” file that is necessary to use the SD card with the
DR-40.
1 Use the + or − button to select
QUICK FORMAT
, and press
the ENTER/MARK or / button to highlight
Exec
.
2 Press the ENTER/MARK button to open a pop-up
confirmation window.
3 Press the ENTER/MARK button to execute the quick
formatting, or press the (HOME) [8] button to
cancel formatting.
Using FULL FORMAT
Use the
FULL FORMAT
item to completely format the SD card.
Full formatting checks the memory for errors while formatting,
so it takes more time than quick formatting.
Using
FULL FORMAT
erases all music files on the card and
automatically creates new MUSIC and UTILITY folders as well as
the “dr-1.sys” file that is necessary to use the SD card with the
DR-40.
1 Use the + or − button to select
FULL FORMAT
, and press
the ENTER/MARK or / button to highlight
Exec
.
2 Press the ENTER/MARK button to open a pop-up
confirmation window.
12 – Settings and Information