Teac DR-40 - Manual (Page 74)

74
TASCAM DR-40
On the Home Screen, you can use the . and / buttons
to select the playback file. The files that you can select are
determined by the playback area setting.
Limiting the playback area makes file selection easier when
you have numerous recorded and copied files on the SD card.
On the
PLAY SETTING
Screen, you can select all files, the
current folder or the playlist as the playback area. You can also
use the
BROWSE
Screen to set a folder as the playback area.
TIP
On the
BROWSE
Screen, regardless of the playback area setting,
you can select any file on the card that you want.
Adjusting playback volume
The volume of output through the built-in speaker or the
/LINE OUT connector can be adjusted using the + or −
button while the Home Screen is shown.
A pull-up volume indicator appears.
Setting the playback area (AREA)
Set the playback area for repeat and ordinary playback on the
PLAY SETTING
screen.
1 Press the MENU button to open the
MENU
Screen.
2 Use the + or − button to select
PLAY SETTING
and press
the ENTER/MARK or / button.
3 Use the + or − button to select (highlight) AREA, and
press the ENTER/MARK or / button.
4 Use the + or − button to set the playback area.
ALL FILES
Set the playback area as all files in the Music Folder on the
SD card.
6 – Playback