Teac DR-40 - Manual (Page 24)

24
TASCAM DR-40
Bottom Panel
; Mono speaker
Use this built-in speaker to listen to recordings.
The speaker will not produce sound in the following
situations.
When in recording standby •
When headphones are connected •
When recording •
When the speaker output setting is off •
When in overdubbing mode •
z Mounting thread for tripod or tilt foot (1/4-inch)
Use this to attach a tripod or the included tilt foot to the
recorder.
CAUTION
Tighten the unit securely to the tripod or microphone stand •
to prevent it from falling off.
Place the tripod or microphone stand on a level surface
•
when using it with this unit.
x Battery compartment cover
When not using the included tilt foot, it can be stored by
inserting it between the two protrusions on the inside of
the battery compartment cover.
c Hole for strap
2 – Names and Functions of Parts