Teac DR-40 - Manual (Page 39)

TASCAM DR-40
39
Removing the card
1 Open the SD slot cover on the right side panel.
2 Press the SD card in gently and then release it to allow
it to come out.
CAUTION
Do not remove the SD card from the unit when it is •
connected to a computer by USB.
SD cards that meet SD or SDHC standards can be used with
•
this unit.
A list of SD cards that have been confirmed to work with
•
this unit can be found on our website (http://tascam.com/).
Card write protection
SD cards have protect switches that prevent writing new data
to them.
Unprotected Protected
If you slide the protect switch to the “LOCK” position, file
recording and editing is not possible. Move the switch to the
unlocked position in order to record, erase and otherwise edit
data on the card.
3 – Preparation