Teac GVI - Manual (Page 36)

36
STACKING VS. LOADING
In this picture, Channel 1 has loaded a stacked instrument with the default name of
‘Stacked Instrument – 0’, which contains two stack members (single instruments),
Melodica and Dallape Accordian. Channels 2, 3, and 4 each contain single instruments.
There are two ways to add instruments to a channel in the MIDI mixer
using the MIDI Channel drop-down menus. You can select which mode to
use by clicking on a channel’s drop-down menu.
Loading an Instrument replaces anything currently loaded on a MIDI Mixer
channel. The previous instruments are detached from the channel but not
“unloaded” (see below).
Stacking adds an Instrument to a MIDI mixer channel without detaching
any currently loaded instrument(s). When more than one instrument is
loaded on a single MIDI Mixer channel, a stacked instrument is created
containing all of the currently loaded instruments (stack members). The
“Stack” option is not available until at least one instrument is loaded on a
MIDI mixer channel.