Teac GVI - Manual (Page 38)

38
LOADING A SINGLE FILE INTO A MIDI CHANNEL
A MIDI channel that contains no instrument assignments displays “Click to
Load...” in its channel slot field. Here’s how to load a File:
Channel Load menu
1. Click on the Down Arrow located on the right border of the channel slot field of an
empty MIDI channel to open that channels drop-down menu.
2. Move the cursor over the “Load” menu item.
3. Under Load, a menu appears with two options: Browse followed by a list
of recently loaded files.
4. If you choose one of the files from the list of recently loaded instruments,
it will automatically load on the specified channel. If you choose Browse, a
new navigation window appears allowing you to browse for GIG and GSI
files. Refer to the numbered/lettered callouts below for what each section of
the screen shows.