Thinklogical HDX80 Manual - Manual (Page 20)

Revision A December 2011 12
Note: Removing the Primary Controller Card when it is Active will power down the
HDX Router and interrupt service. Refer to page 39 “How to Replace a Controller
Card”.
Note: When using a Back-up Controller configuration in a Secure Application with
Restrictive Switching, both controllers must have the same Restrictive Switching Table
files (see Appendix D: Secure Applications).
Sync Card
The hot-swappable Sync Card provides a Reference Input and loop output so that switch
connections can be made synchronously with an external reference or “House Sync”. All switch
connection timing complies with SMPTE RP 168 and with SMPTE 274M depending on signal
format. The Reference Input accepts any of the following signal formats:
NTSC 525iPAL 625i
1280x720p60
1280x720p59.94
1280x720p50
1280x720p30
1280x720p29.97
1280x720p25
1280x720p24
1280x720p23.98
1920x1080p60
1920x1080p59.94
1920x1080p50
1920x1080i60
1920x1080i59.94
1920x1080i50
1920x1080p30
1920x1080psf30
1920x1080p29.97
1920x1080psf29.97
1920x1080p25
1920x1080psf25
1920x1080p24
1920x1080psf24
1920x1080p23.98
1920x1080psf23.98