Thinklogical HDX80 Manual - Manual (Page 28)

Revision A December 2011 20
Connecting to the Transmitter
The Transmitter serves as the Source (computer and video entities). Depending on your
configuration, your local KMASS devices (keyboard, mouse, etc) are first connected. The video
sources (e.g. computers) are then connected followed by any local video devices. Power can
then be supplied to the unit. The Transmitter connects to the HDX I/O ports using fiber (Multi-
mode fiber for distances up to 1000m; Single-mode fiber for distances beyond 1000m).
Figure 21: Connecting the Thinklogical™ SDI Xtreme 3G+ Extender Transmitter to the HDX80
Figure 22: Connecting the Thinklogical™ SDI Xtreme 3G+ Extender Transmitter to the HDX576