Thinklogical HDX80 Manual - Manual (Page 60)

Revision A December 2011 52
Figure 34: View of Router from Administration Page
The “Sync Format” field describes how routers equipped with the sync card will synchronize
new connections. The simplest choice is “AUTO (follow input)” which will attempt to use the
format of the supplied “House Sync” signal. Clicking in this field will pop-up a list of choices as
seen in figure 35.
The “House Sync” field will display the format of the sync detected at the sync input. If no card is
present it will display “card not installed”.
“Sync Status” will indicate whether the router has been able to lock to the House Sync using the
Sync Format chosen by the user. This field will display “locked”” or “not locked”, or, if the card is
not present, it will be blank.