Figure 7-1. replacing the print head, Figure 7-2. carriage restraining hook, Figure 7-1 – Visara 1330-X02 User Manual
Page 117: Replacing the print head -3, Figure 7-2, Carriage restraining hook -3, Maintaining the 1330
Advertising
701333-004
7-3
Maintaining the 1330
Connectors
Figure 7-1. Replacing the Print Head
Note:
Print head style 2 has a connector at the top of the print head. This connector
does not have to be disconnected when you remove the print head.
Note:
Take care that the wiring from the ribbon select motor stays through the carriage
restraining hook. Refer to Figure 7-2.
10. If it is installed, remove the tie-wrap holding the print head wires to the carriage.
Restraining Hook
Figure 7-2. Carriage Restraining Hook
Advertising