Visara 1330-X02 - Manual (Page 12)

1-4 701333-004
Introduction
Color
The 1330 can print in monochrome or color, using an operator installable recirculating
cloth ribbon cartridge. Two monochrome ribbons, a 4-color accent ribbon (black, red,
blue, and green), and a subtractive 8-color ribbon (black, red, blue, green, yellow, magenta,
cyan, and brown) are available.
Paper Handling
The 1330 comes standard with pull tractors for continuous forms feeding, and allows for
easy paper loading at the front of the printer. Pinfeed forms from 3 to 14 inches (7.6 to
35.6 cm) long and 3 to 15 inches (7.6 to 38.1 cm) wide can be used. This configuration is
especially suited for a large volume of work or work that requires little operator
intervention.
Print Qualities
The 1330 can print in four qualities:
• Fast Draft Quality (FD) (available only in 3270 mode)
• Data Processing (DP)
• Data Processing Text (DP Text)
• Near Letter Quality (NLQ)
All print qualities are selectable via the operator control panel.
Multiple Copies
The 1330 can print multiple copies, one original plus five copies, total thickness not to
exceed 0.025 inch (0.64 mm). The recommended maximum thickness for multipart forms
is 0.018 inch (0.46 mm).
3270 Languages
The 1330 enables the operator to select from 39 international language character sets.
Selection is made during printer configuration. The attached control unit should be
configured for the same language.
Screen Sizes
Any of the following display buffer sizes can be selected for print operation:
• 1920 bytes
• 2560 bytes