Visara 1330-X02 - Manual (Page 44)

701333-004 3-5
Operator Control Panel
The Option key puts the 1330 in Menu mode. In Menu mode you can configure the 1330
by setting options to the values you want or you can run diagnostic tests to verify the
printer’s performance. This key is active only in Stop mode.
The Save key is only active in Menu mode. It saves the value of the currently selected
option when you are configuring the 1330 from the keypad. The Save key is also used to
start a test case under the Diagnostic menu.
The Contrast key in Ready mode enables the operator to get into the Contrast mode
where the operator can manually adjust the print for darkness. For more details, see
Chapter 6.
The Setup key prints a setup line of Hs from the left margin to the right margin. The
Setup key is active in Stop mode and Contrast mode to help the operator verify the
current print format and print contrast.
The Cancel Print key cancels any chained SCS printing currently in process. This key is
active only in Stop mode.
Option
Save
Contrast
Setup
Cancel
Print