Allmand Brothers MB 6200 - Manual (Page 60)

60
System Element Problem Probable Cause Corrective Action
Contamination
on rail
assembly. Remove SBC and
BRICK next to SBC
from rail assembly.
Inspect rail assembly
for contaminants.
Remove as necessary.
Sign message text
displayed upside down Inadequate
connection of
BRICK or
Jumper BRICK
to rail assembly. Check for proper
attachment of BRICK
and Jumper BRICKs at
problem location on
rail assembly. See
Figure 3 for location.
See also
BRICK
Installation section for
additional information.