H3C Technologies H3C S10500 Series Switches - Manual (Page 49)

41
[DeviceA] traffic classifier host
[DeviceA-classifier-host] if-match acl 2002
[DeviceA-classifier-host] quit
# Create a behavior named server, and configure the CAR action for the behavior as follows: set the CIR
to 1024 kbps, and mark the excess packets (red packets) with DSCP value 0 and transmit them.
[DeviceA] traffic behavior server
[DeviceA-behavior-server] car cir 1024 red remark-dscp-pass 0
[DeviceA-behavior-server] quit
# Create a behavior named host, and configure the CAR action for the behavior as follows: set the CIR
to 256 kbps.
[DeviceA] traffic behavior host
[DeviceA-behavior-host] car cir 256
[DeviceA-behavior-host] quit
# Create a QoS policy named car, and associate class server with behavior server and class host with
behavior host.
[DeviceA] qos policy car
[DeviceA-qospolicy-car] classifier server behavior server
[DeviceA-qospolicy-car] classifier host behavior host
[DeviceA-qospolicy-car] quit
# Apply QoS policy car to the incoming traffic of port GigabitEthernet 1/0/1.
[DeviceA] interface GigabitEthernet 1/0/1
[DeviceA-GigabitEthernet1/0/1] qos apply policy car inbound
2. Configure Device B
# Configure advanced ACL 3001 to match HTTP traffic.
<DeviceB> system-view
[DeviceB] acl number 3001
[DeviceB-acl-adv-3001] rule permit tcp destination-port eq 80
[DeviceB-acl-adv-3001] quit
# Create a class named http, and use ACL 3001 as the match criterion.
[DeviceB] traffic classifier http
[DeviceB-classifier-http] if-match acl 3001
[DeviceB-classifier-http] quit
# Create a class named class, and configure the class to match all packets.
[DeviceB] traffic classifier class
[DeviceB-classifier-class] if-match any
[DeviceB-classifier-class] quit
# Create a behavior named car_inbound, and configure the CAR action for the behavior as follows: set
the CIR to 2048 kbps.
[DeviceB] traffic behavior car_inbound
[DeviceB-behavior-car_inbound] car cir 2048
[DeviceB-behavior-car_inbound] quit
# Create a behavior named car_outbound, and configure a CAR action for the behavior as follows: set
the CIR to 1024 kbps.
[DeviceB] traffic behavior car_outbound
[DeviceB-behavior-car_outbound] car cir 1024