H3C Technologies H3C S10500 Series Switches User Manual
Page 87
79
[DeviceB-Vlan-interface300] mpls ldp
[DeviceB-Vlan-interface300] quit
4.
Configure Device C
# Configure a VPN instance.
<DeviceC> system-view
[DeviceC] ip vpn-instance vpn1
[DeviceC-vpn-instance-vpn1] route-distinguisher 200:1
[DeviceC-vpn-instance-vpn1] vpn-target 200:1 export-extcommunity
[DeviceC-vpn-instance-vpn1] vpn-target 200:1 import-extcommunity
[DeviceC-vpn-instance-vpn1] quit
# Configure a BGP connection.
[DeviceC] router id 2.2.2.2
[DeviceC] bgp 200
[DeviceC-bgp] peer 1.1.1.1 as-number 200
[DeviceC-bgp] peer 1.1.1.1 connect-interface loopback 0
[DeviceC-bgp] ipv4-family vpn-instance vpn1
[DeviceC-bgp-vpn1] peer 169.1.1.1 as-number 300
[DeviceC-bgp-vpn1] peer 169.1.1.1 route-policy qppb import
[DeviceC-bgp-vpn1] quit
[DeviceC-bgp] ipv4-family vpnv4
[DeviceC-bgp-af-vpnv4] peer 1.1.1.1 enable
[DeviceC-bgp-af-vpnv4] peer 1.1.1.1 route-policy qppb import
[DeviceC-bgp-af-vpnv4] quit
[DeviceC-bgp] quit
# Configure a routing policy.
[DeviceC] route-policy qppb permit node 0
[DeviceC-route-policy] apply qos-local-id 1023
[DeviceC-route-policy] quit
# Configure MPLS.
[DeviceC] mpls lsr-id 2.2.2.2
[DeviceC] mpls
[DeviceC-mpls] quit
[DeviceC] mpls ldp
[DeviceC-mpls-ldp] quit
# Configure OSPF.
[DeviceC] ospf
[DeviceC-ospf-1] area 0
[DeviceC ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[DeviceC ospf-1-area-0.0.0.0] network 168.1.1.0 0.0.0.255
[DeviceC ospf-1-area-0.0.0.0] quit
[DeviceC-ospf-1] quit
# Configure a QoS policy.
[DeviceC] traffic classifier qppb
[DeviceC-classifier-qppb] if-match qos-local-id 1023
[DeviceC-classifier-qppb] quit
[DeviceC] traffic behavior qppb