H3C Technologies H3C S10500 Series Switches - Manual (Page 79)

71
Class-based accounting configuration
Class-based accounting overview
Class-based accounting collects statistics (in packets or bytes) on a per-traffic class basis. For example,
you can define the action to collect statistics for traffic sourced from a certain IP address. By analyzing
the statistics, you can determine whether anomalies have occurred and what action to take.
Configuring class-based accounting
Follow these steps to configure class-based accounting:
To do… Use the command… Remarks
Enter system view system-view —
Create a class and enter class
view traffic classifier tcl-name [ operator { and
| or } ]
—
Configure match criteria if-match match-criteria —
Return to system view quit —
Create a behavior and enter
behavior view
traffic behavior behavior-name Required
Configure the accounting
action
accounting { byte | packet }
Optional
• byte: Counts traffic in bytes.
• packet: Counts traffic in
packets.
Only the packet keyword of this
command is available on the
SC, SA, and EA cards.
Return to system view quit —
Create a policy and enter
policy view
qos policy policy-name —
Associate the class with the
traffic behavior in the QoS
policy
classifier tcl-name behavior
behavior-name
—
Return to system view quit —
To an interface Applying the QoS policy to an interface —
To a VLAN Applying the QoS policy to a VLAN —
Globally Applying the QoS policy globally —
Apply the
QoS
policy
To the control
plane Applying the QoS policy to the control
plane
—