H3C Technologies H3C S10500 Series Switches - Manual (Page 91)

83
[DeviceB-behavior-qppb] quit
[DeviceB] qos policy qppb
[DeviceB-qospolicy-qppb] classifier qppb behavior qppb mode qppb-manipulation
[DeviceB-qospolicy-qppb] quit
# Apply the QoS policy to the outgoing traffic of VLAN 3.
[DeviceB] qos vlan-policy qppb vlan 3 outbound
4. Verify the configuration
# Check whether the related routes on Device A take effect.
[DeviceA]display ipv6 routing-table
Routing Table :
Destinations : 7 Routes : 7
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 1::/64 Protocol : Direct
NextHop : 1::1 Preference: 0
Interface : Vlan2 Cost : 0
Destination: 1::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 2::/64 Protocol : BGP4+
NextHop : 168::2 Preference: 255
Interface : Vlan3 Cost : 0
Destination: 168::/64 Protocol : Direct
NextHop : 168::1 Preference: 0
Interface : Vlan3 Cost : 0
Destination: 168::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
# Check whether the related routes on Device B take effect.
[DeviceB] display ipv6 routing-table
Routing Table :
Destinations : 7 Routes : 7
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0