HEIDENHAIN MANUALplus 4110 Pilot User Manual
Page 115
115
Milling tools
Milling tools
Tool parameters
X, Z:
Setup dimensions
I:
Cutter diameter
WO:
Tool orientation (number shown in graphic support window)
K:
Number of teeth
DX/DZ:
Wear compensation
Q:
(Reference to) tool text
MD:
Direction of rotation (3=M3; 4=M4) default: not assigned
TS:
Cutting speed – default: not defined
TF:
Feed rate per tooth – default: not defined
PT:
Tool life – default: not defined
RT:
Rem. dwell: Remaining tool life (display field)
PZ:
Number of units – default: not defined
RZ:
Remaining pieces (display field)
• When milling with “constant cutting speed”,
MANUALplus calculates the spindle speed
from the “cutter diameter I”.
• The “Number of teeth K“ is evaluated in
“G913 Feed rate per tooth“.
• I is necessary to show the tool tip in graphic
simulation.