HEIDENHAIN iTNC 530 (60642x-04) ISO programming - Manual (Page 534)

534 Manual Operation and Setup
14.1
0
Tilting
the
w
o
rk
ing
plane
(sof
tw
ar
e
option
1) Position display in a tilted system
The positions displayed in the status window (ACTL. and NOML.) are
referenced to the tilted coordinate system.
Limitations on working with the tilting function
 The probing function for basic rotation is not available if you have
activated the working plane function in the Manual Operation mode.
 The actual-position-capture function is not allowed if the tilted
working plane function is active.
 PLC positioning (determined by the machine tool builder) is not
possible.