HEIDENHAIN iTNC 530 (60642x-04) ISO programming - Manual (Page 628)

628 Tables and Overviews
18
.1
Gener
al
user
par
amet
ers
Configuring tool
pocket table (to omit
from the table: enter 0);
Column number in the
pocket table for
MP7267.0
Tool number – T:
0 to 20
MP7267.1
Special tool – ST:
0 to 20
MP7267.2
Fixed pocket – F:
0 to 20
MP7267.3
Pocket locked – L:
0 to 20
MP7267.4
PLC status – PLC:
0 to 20
MP7267.5
Tool name from tool table – TNAME:
0 to 20
MP7267.6
Comment from tool table – DOC:
0 to 20
MP7267.7
Tool type – PTYP:
0 to 20
MP7267.8
Value for PLC – P1:
0 to 20
MP7267.9
Value for PLC – P2:
0 to 20
MP7267.10
Value for PLC – P3:
0 to 20
MP7267.11
Value for PLC – P4:
0 to 20
MP7267.12
Value for PLC – P5:
0 to 20
MP7267.13
Reserved pocket – RSV:
0 to 20
MP7267.14
Pocket above locked – LOCKED_ABOVE:
0 to 20
MP7267.15
Pocket below locked – LOCKED_BELOW:
0 to 20
MP7267.16
Pocket at left locked – LOCKED_LEFT:
0 to 20
MP7267.17
Pocket at right locked – LOCKED_RIGHT:
0 to 20
MP7267.18
S1 value for PLC – P6:
0 to 20
MP7267.19
S2 value for PLC – P7:
0 to 20
TNC displays, TNC editor