SMA SB 1.5-1VL-40 - Manual (Page 12)

Symbol Explanation
Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during op-
eration. Prior to performing any work on the product, allow the prod-
uct to cool down sufficiently.
Danger to life due to electric shock
The product operates at high voltages. Prior to performing any work
on the product, disconnect the product from voltage sources. All
work on the product must be carried out by electrically qualified per-
sons only.
Observe the documentation
Observe all documentation supplied with the product.
Danger
This symbol indicates that the inverter must be additionally grounded
if additional grounding or equipotential bonding is required at the
installation site (see Section 6.3.3 "Connecting Additional Ground-
ing", page 25).
Direct current
The product does not have a transformer.
Alternating current
WEEE designation
Do not dispose of the product together with the household waste but
in accordance with the disposal regulations for electronic waste ap-
plicable at the installation site.
CE marking
The product complies with the requirements of the applicable EU di-
rectives.
Degree of protection IP65
The product is protected against dust intrusion and water jets from
any angle.
4 Product Description SMA Solar Technology AG
Operating Manual SB15-25-BE-en-10 12